TOP 10 USUAL FORKLIFT CRASHES , FORKLIFT PROCEDURE NEED TO TAKE NOTICE OF THESE ISSUES !.

Top 10 usual forklift crashes , forklift procedure need to take notice of these issues !.

Top 10 usual forklift crashes , forklift procedure need to take notice of these issues !.

Blog Article


Do not underestimate the forklift at the office. If the procedure is not good, there will be serious accidents in mins, and there are lots of mishaps entailing forklifts.

Situation 1: The forklift cargo blocked the motorist's view, and the person in front can not be found, leading to a moving accident.
Situation 2: In order to keep the equilibrium of the forklift when lifting heavy products, the staff members used their body weight as the weight, which almost triggered casualties.
Case 3: The width of the forklift freight surpasses the allowable size of the route and holds on the roadside shelf, which practically causes an crash.
Situation 4: Forklift is speeding and surrender throughout a turn.
Instance 5: The forklift driver did not observe the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift lifts the employees illegally, the forklift driver does not put on the seat belt, the forklift lifter drops and the chauffeur is squashed when the forklift rolls over.
Case 7: The forklift motorist did not put on a safety belt and fell from the lorry when it rolled over and was crushed.
Forklift operation must take note of these matters :.

Beginning.
1. Before starting, observe the environments, and after validating that there are no obstacles that impede the safety and security of driving, beep the horn first and after that begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic pressure (air pressure) gauge need to be secure before beginning.
3. When the forklift begins with a lots, the driver needs to first confirm that the tons is stable and trusted.
4. The begin must be slow-moving and stable.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast needs to be tilted backwards. .
2. Do not raise the fork too expensive when driving. When getting in and leaving the job website or while driving, take care that there will be no challenges overhead. When the load is taking a trip, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After discharging, the fork needs to be lowered to the typical driving placement prior to driving. .
4. When turning, if there are pedestrians or automobiles close by, the driving signal needs to be issued first. High-speed doglegs are banned. High-speed sharp turns will trigger the automobile to shed lateral stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special conditions.
6. When the forklift is running, it has to obey the traffic rules in the factory and should keep a specific security distance from the automobile in front. .
7. When the forklift is running, the tons needs to remain in the lowest setting that does not impede the driving, and the gantry must be appropriately slanted back. The tons shall not be increased except when stacking or loading. .
8. The elevation of the lots have to not obstruct the motorist's sight. In special situations, when the item affects the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to turn on the ramp, nor to drive throughout the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it has to drive securely at a low rate when getting in the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing role. .
12. If troubles are located, they will be repaired and reported in a prompt way, and they will never ever operate with diseases or hide them.

packing and unloading.
1. When fork-loading things, the range between both forks ought to be adjusted as required to make the load of both forks balanced and not manipulated, and one side of the product ought to protest the rack. .
2. It is restricted to deal with a single fork or make use of a fork top or pull. In unique situations, safety and security warning signs must be established to remind bordering pedestrians. .
3. In the process of loading and discharging items, the forklift needs to be braked with the brake. .
4. The rate of the vehicle must be slow and consistent. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt individuals. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the tons, and it needs to be noted that the fork idea should not touch other items or objects. The tons needs to be stabilized with marginal back tilt of the gantry so that the tons does not glide backwards. The mast can be slanted onward slightly when the tons is decreased to permit easy placement of the lots and removal of the forks. .
6. It is forbidden to fork products at broadband and ram hard items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to stand around the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Straining is prohibited, and it is restricted to utilize forks to raise employees to engage in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not enabled to utilize the brake inertia to slide, place, round or roll things. .
10. It is not permitted to make use of forks Stand-on Electric Pallet Stacker to select, transform pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before Stand-on Electric Pallet Stacker leaving the forklift, you should unload the goods or lower the fork frame.
2. Pull the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for unique conditions, such as the vehicle driver does not leave the vehicle's line of vision and does not go beyond 1 min).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look needs to be checked, and fuel, lubing oil and air conditioning water need to be added.
2. Examine the safety and security efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are complete and reliable.
4. During the operation of the forklift, examine whether the pressure and temperature level are normal.
5. After the forklift is running, the external leakage needs to additionally be checked and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You have to check before leaving the cars and truck;.
2. When you experience somebody before you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be as well sharp to stop the propensity of " cost-free turning";.
6. Adding and down the incline should be slow-moving and consistent, and no switching on the slope is permitted.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the automobile must be driven backwards when declining;.
8. When the forklift personnel carry the goods and move forward, if they run into large or hefty items and most likely to the vehicle driver's line of sight, they need to take the turning around exercise
.
The "Eight Prohibitions" need to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not allowed to lift the goods for cross country driving.
3. It is not permitted to get the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not permitted to use inertia force to get the goods.
6. It is not permitted to make use of stopping force to expatriation round or easy-to-roll items.
7. It is not permitted to bring people to service the pallet or fork, and it is strictly restricted to stand under the fork after the fork is increased.
8. Do not drive laterally on slopes
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the exact same size as the barrier ought to be within 20 meters at each end.

Web:https://www.onenforklifts.com/
Email:info2@onen.cn
Phone:+86 13827083844

Report this page